2018 Land Pride PD15
Call for Price
The PD15 Series Post Hole Diggers are designed for Category 1 three-point attachment, offers a 48" auger length and a choice of 6", 9", or 12" auger flights with cast steel fishtail tips. Landscapers, rental yards, contractors, farmers, ranchers, and homeowner will find that the PD15 meets their general duty needs and applications.
- 2 7/8” Yoke tubing: 3/16” Wall thickness for strength.
- Auger length: 48” Auger.
- Auger flighting: 1/4” Flighting, Semi-double flight.
- Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips.
- 2” Output shaft: 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers.
- Down pressure kit (optional): Allows additional force to be supplied, hydraulically, to the beam to help force digger into the ground.
- Alignment handle (optional): Helps guide the auger from the tractor seat.
- Post Hole Digger stand (optional): Bracket mounted to bottom of gearbox can incorporate a Post Hole Digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor.
- Tractor HP Range: 20 to 40 HP
- Weight Without Auger: 161 lbs.
- Auger Length: 48 in.
- Auger Flight Thickness: 1/4 in.
- Auger Pipe: 2 1/2 in. ID
- Auger Teeth: Forged, Individually Replaceable. 40 Degree angle installed on flat side; 50 Degree angle installed on angled side
- Number of Teeth: 6 in. - 2 teeth; 9 in. & 12 in. - 4 teeth
- Pilot: Cast steel, 3 drill points
- Driveline: Cat. II Shearbolt
- Maximum Operating PTO Speed: 300 RPM
- Gearbox: 1 3/8 in. 6B spline input shaft, 3.18:1 Ratio
- Gearbox Oil Capacity & Type: 4.6 Pints of SAE80-90W EP oil
- Output Shaft: 2 in. O.D. Round
- 3-Point Hitch Cat.: Cat. I
- Boom Tube: 2 7/8 in. O.D.
- Yoke Tube: 2 7/8 in. O.D.
- Auger Sizes (Options): 6", 9", or 12"
- Auger Extensions (Accessories): 7" & 14" Extensions Available
- Cat. III Torque Limiter Driveline: Not Available
- Hydraulic Down Pressure Kit: Available
- Storage Stand: Available
- 2 7/8 in. O.D.
- Auger Size
- 6, 9, or 12 in.
- Gear Reduction
- 3.18:1 Ratio
- 161 lb. without auger